The Benefits of Applying Motorcycle Protection Film to Motorcycle Surfaces

the benefits of applying motorcycle protection film to motorcycle surfaces 01

Many factors will all degrade paint and other graphics over time. Gravel and grit thrown up by other vehicles, grit and grime on the road, scraping and abrasions, sun, detergents and other chemicals used for washing will all take their toll. If a vehicle is covered with wrap or other printed designs, it will generally be desirable to keep these looking as close as possible to “as new”.

Applying Motorcycle Protection Film to the top of existing paint, wraps and other graphics will offer some protection against many aspects of normal usage. It will therefore prolong the “as-new” appearance. It follows that it is desirable for all motorcycle owners, fitters of wraps, and companies producing decals, to have access to a good quality and suitable Motorcycle Protection Film for this purpose.

Why Use Motorcycle Protection Film on Motorcycles?

Most areas of a motorcycle will be contoured to some degree. The fuel tank, most of the fairings, and many other panels will have various curves. Clearly all of these areas will be liable to impact and abrasion as a result of normal usage.

Applying Motorcycle Protection Film will therefore minimise the amount of impact directly onto the underlying area. Some examples of benefits from this are:

  • Protection to existing paint: minimise the amount of scraping and abrasion, including “pebble” damage.
  • Protect existing graphics on a motorcycle: minimise abrasion and the effect of long periods of sunshine.
  • Prolong “as-new” appearance of existing paint and other decorations.
  • Minimise the effects of sun, grime, petrol and other spillages, detergents, and so on.

Naturally, any bespoke graphics would also benefit from an applied Motorcycle Protection Film.

the benefits of applying motorcycle protection film to motorcycle surfaces 02

Considerations for Choosing Suitable Motorcycle Protection Film

As mentioned above, much of a motorcycle is curved and may be fairly intricate. It will therefore be necessary to choose a Motorcycle Protection Film with appropriate characteristics.

Thickness

Clearly the thicker the material, the greater degree of protection it is likely to offer against scraping and pebble strike.

When applied over graphics, or existing paint, a 300 micron thickness should give a good level of protection, whilst still being sufficiently pliable to allow application around most curves without unduly affecting the overall appearance.

Sticking to the Area to Be Covered

Many areas, in particular the fuel tank, are considerably curved. It will therefore be beneficial to have a reasonably strong sticky adhesive to ensure that it stays well stuck down to all areas.

Using a High Tack adhesive would be advantageous for many areas, allowing the Motorcycle Protection Film to adhere well to large curved areas such as fuel tanks, and even helmets. This should also assist in achieving a good overall lie to the shape of various areas.

Pliability

Ideally the material should stretch sufficiently to enable easy application around the various curves to be encountered. This would be very beneficial when fitting Motorcycle Protection Film around many areas, particularly if intricate designs are involved.

It is also beneficial if the material has little tendency to shrink once fitted. Otherwise there is a risk of the edges lifting as the film shrinks.

Range of Finishes

Obviously it is possible to apply a completely clear and therefore “invisible” Motorcycle Protection Film, but there are other options to enhance certain features. A range of finishes is available:

  • Gloss would give a high-shine smooth finish.
  • Matte would be less noticeable.
  • Various Glitter effects could enhance some areas of a design.

These can therefore all be used to enhance various features of a design in addition to offering protection.

Uses of Motorcycle Protection Film on Various Motorcycle Areas

Protection to Existing Paint

Motorcycle Protection Film will reduce many types of damage to the surface as discussed above. Many areas such as the tank, and most fairings, would be susceptible to various types of damage from normal usage.

Over Existing Graphics

Many motorcycles will have extensive areas of printed graphics. Applying a Motorcycle Protection Film as a Cold Lamination over these would add an extra degree of protection from abrasion and sun fade, and so prolong their life, all without significantly affecting the overall design.

Lamination over Stickers

Companies producing and converting stickers for application to motorcycles would obviously benefit from applying a Motorcycle Protection Film over the finished product. This would improve the durability of the finished article. Again there is a choice of Gloss, Matte or various Glitter effects, opening up many possibilities.

Lamination over Printed Designs

As well as printing onto a roll of adhesive vinyl, there may be other processes involved, such as die cutting, application, and finally lamination.

Once all the required printing has been achieved onto a suitable base material, it would be normal to apply an appropriate Motorcycle Protection Film as a protective lamination. There would therefore be 2 layers, namely the required print or prints, and a top protective layer.

Clearly the type of Motorcycle Protection Film used would depend upon the end product. For example, a high-gloss overall effect may dictate the use of a Clear Gloss lamination, whereas others may benefit from a Matte. Alternatively one or more areas could benefit from various Glitter effects.

There are therefore many considerations to be taken into account by companies producing this type of product to achieve the desired effect.

the benefits of applying motorcycle protection film to motorcycle surfaces 03

Motorcycle Protection Film Supplier – Great K2

As well as the individual characteristics discussed above, it is also desirable that all these characteristics are consistently achieved throughout any roll of material and from roll to roll.

As mentioned previously, Great K2 produces a range of Self-Adhesive Vinyls, suitable for all aspects of covering and decorating motorcycles. As described, they offer a range of Motorcycle Protection Films based on a 300 micron Soft Vinyl and High-Tack adhesive to allow good conformation to most curves.

These Motorcycle Protection Films are available in Gloss, Matte, and various Glitter effects, all in widths of 1.37m and 1.52m. They would be suitable for application to many aspects of decorating and protecting motorcycles.

Great K2 has over 10 years of experience manufacturing all types of self-adhesive vinyl and applies in excess of 40 QC checks. They supply to many countries worldwide. Further information can be found under their Motorcycle Protection Films.

Summary

As can be seen there are many reasons to apply suitable Motorcycle Protection Film to many areas of a motorcycle, to help preserve existing paint and other printed effects. Thickness, stickiness, pliability, shrinkage and finish are all factors to consider.

Any company producing graphics for application to a motorcycle, or a fitter applying them, would therefore benefit from applying a suitable Motorcycle Protection Film. Using a consistently good quality product from an experienced manufacturer should ensure good results.

0 Shares:
You May Also Like